Gianneli Colours Paint Splatter Men's Jersey T-Shirt

Paint splatter on white, carried over the shoulders and down the sleeves. Splatter is the one design where a chest-panel print gives itself away immediately, because thrown paint does not stop in a rectangle. Printing the cloth before it is cut is what lets the marks run off one panel and continue onto the next.

Why Splatter Has To Be Printed Before Cutting

• Thrown paint has no edge. A design that stops at an invisible boundary looks pasted on; here the marks cross the shoulder seam and keep going down the arm.
• The droplets stay sharp. Sublimation holds a fine spot at full definition, where a coarser method fills in the smallest marks and turns spray into blotches.
• Nothing can flake. The colour is in the fibre, so even the densest cluster of paint stays as soft as the white around it.

The Blank Underneath

95% polyester with 5% elastane, composition varying by up to 1%, in a premium mid-weight jersey, four-way stretch recovering on the cross and lengthwise grains. Blank components in the US and Mexico are sourced from the US, EU components from Lithuania.

The One Thing People Get Wrong About It

Splatter on white invites a particular worry, so it is worth saying plainly: the paint is printed, and a real stain landing on this shirt will not blend in with it. Marks show against the white ground exactly as they would on any pale tee, and same-day cleaning is what keeps it looking intentional rather than grubby.

Keep The Rest Clean And Simple

Black or indigo denim, plain and dark. The shirt already has motion and mess built into it, so a busy bottom half reads as chaos rather than as contrast. White footwear picks up the ground; anything patterned competes with the splatter.

Real Paint, Fake Paint And Fit

Does the splatter continue onto the back? Yes, and down the sleeves. The whole garment is printed, which is the point of the design.

Will a real stain be hidden by the pattern? No. The printed marks are flat and even in tone; a genuine stain has a different edge and a different depth, and it will read as a stain. Treat this as the white shirt it is.

Does the cut run true to size? No. The M to L step is nearly five inches where the other steps are around three, so a 40 to 42 inch chest belongs in L.

Size Guide

These are body measurements, not garment measurements. Run a tape around the fullest part of your chest with your arms down, keep it level, and match the figure below. Read this table before you order your usual size. The jump from M to L is nearly five inches, far wider than the gap between the other sizes, so a chest of 40 to 42 inches needs L rather than M.